Bookmark and Share

Building: Permits for Fences & Swimming Pools

As a citizen it is my responsibility to...

Visit the Building Division Office when applying for a permit for a fence, tent, pool or utility building. 


Fences six feet or less in height may not require a permit but will still need to conform to easement and setback requirements as well as applicable sight distances (not become a structure that blocks view of on-coming traffic).
 

Pools that will disturb areas larger than 750SF will require plot plan.  Even if it does not exceed 750 square feet, pool construction is still not to be done in such a way as to cause surface drainage to change to other properties or blcok from leaving other properties.


Utility buildings less than 120 square feet in area may not require a permit but will still need to conform to easement and setback requirements. 
 

The following Items will be required for the Building Inspectors review for fences, tents, pools or utility buildings:
1. A completed building permit application with all applicable spaces filled in; a blank application form may be obtained from the Building Division. Any conditions unique to the project should be completely explained in the application.
2. An approved plot plan.
3. Dimension drawings of your proposed structure.
4. Once a permit is issued, it is your responsibility to call the Building Division to request an inspection at the completion of each phase of the project.
 

It is the responsibility of the city to...

A Building Inspector will meet with you to review the material for compliance with the current edition of the Kentucky Building Code, as applicable. The application is then forwarded to the City-County Planning Commission, City of Bowling Public Works Engineering Division, the applicable utility company, the Contractors Licensing Board and the Occupational License Division. If any agency adds a condition to the application, you must comply in order for your permit to be valid.
 

Once the permit is issued, it is your responsibility to call the Building Division to request an inspection at the completion of each phase of the project. In addition, the Building Inspector may make interim general inspections to ensure the quality of work and compliance with Code.  After the building has passed final inspection, a Certificate of Occupancy (CO) is issued by the Building Division. This CO certifies that all codes have been met and the structure is in compliance at the time of the CO. After receiving the CO, the structure can be occupied and is then regulated by Chapter 27 (Property Code) of the Bowling Green Code of Ordinances.
 

If I am interested, who do I contact...

Building Division, Neighborhood & Community Services Dept., City Hall Annex, 1017 College St., 393-3615